GENiALi's Blog

inDE Original

0TweetsRetweet

Here is a list of tips that I now have to come to mind.

• Tools.
It takes a lot. Especially when working together. Then
do you need always reflected the same devices doubles.




• Pre-drilled holes in the upper design must.
At us was
It 5 mm. To take a normal drills on a tree. To the sinking
There are special articles.


The difficult most drill depth to be achieved. Even if one in
the drill has a stop the injection is not always exactly the same deep.

• Looks that you secure a level and have a Richtlatte.
Somehow you have
check if the gap is true or whether the floor of some measured any where
just is.

• 3 Cm from the edge ago was screwed.
By the end of the bar there were 10 cm.
We had no recommendations, also I have nothing meaningful in the INET
found. We have simply chosen according to optical and
to be too close to the edge with the idea. Otherwise, the wood could be
columns.
It is now clearly the duplicate substructure for what was needed.



• The resin wood with a hand-held circular saw has been cut.
But soon it became
You can more accurately cut much with an electric jigsaw. Certainly faster
but accurate. The problem with hand-held circular saw is that there no straight edges
was where you could create clean.

• Check that you have enough drills.
The upper structure was with a 5 mm
Pre-drilled drills on a tree. Of which I needed 3 pieces for the 900 screws.
The drill again broke me before the shipping lowering.
I have to screw the angle on the roof with a 3 mm drills for wood
pre-drilled. Of which I've burned also 3 pieces.
The drill for the angle held out longer. I needed only one on.

• Planning a enough time.
If you do it yourself, you must set up no records.
It took four days or 8 mandays for our 28 m 3. We were but
each evening, fix and foxy. However, I am computer scientist and the work in this
Form, simply not accustomed.:-)

• Thinking you well where you the excavation will.
We have used him bumps
to correct the lawn or ramps in the balance.


Now I come through with the lawnmower here better.