GENiALi's Blog

The upper structure is logically after the roof. :-)

Here you must be aware of just exactly what you
it aligns. Which wall or House front gives the
right angle before. For us it was the House wall and
inner retaining wall. Started with the installation, we have
on the House wall.

To note is that the boards were not of equal length.
We need to spoof so all once with the chip set
fix slightly and draw where cut.
Then expand, cut, assemble, freeze and screw.

Now you can see very well for what is the chip set.

Thus draws
you a bunch of boards, is and it screwed.
Above all they practically that are warped in Bretten. Of which
There were more than enough.

The black things between lower and upper design call
CEKO Fux. Enter a distance of 4 mm between lower and upper design
before. So is not wood on wood. Also specifies the bolts of the CEKO Fux
Distance between the upper design boards before. So is
it very easy to achieve a uniform distance of boards.